Thiết bị máy cắt mẫu chuẩn máy kéo căng vật liệu Milling Machine for Preparation of Flat Tensile Specimens TENSILKUT I

Thiết bị máy cắt mẫu chuẩn máy kéo căng vật liệu Milling Machine for Preparation of Flat Tensile Specimens TENSILKUT I , TENSILKUT II

Thiết bị máy cắt mẫu chuẩn máy kéo căng vật liệu  Milling Machine for Preparation of Flat Tensile Specimens TENSILKUT I , TENSILKUT II

Tensilkut I



Tensilkut is a precision milling machine designed specifically for machining flat tensile samples from metals and non-metallic materials. Tensilkut machined specimens are free of induced heat or cold working distortion, and are accurate to within +.0005”. A sample can be machined in a few minutes by lab technicians with no previous machining experience.


Product Summary



The Tensilkut I was designed for the specific purpose of preparing flat metal or non-metallic dogbone shaped test specimens. The compact size of the equipment permits it to be conveniently located in the laboratory. Small table top units or larger floor mounted models are available to accomodate any space and/or work volume requirements. Material thicknesses of up to 3/4”, depending upon the hardness and machineability of the material, can be cut on some Tensilkut I models. The specimens are accurate to within +.0005" when prepared on the Tensilkut machine with a Tensilbit and a standard or special master template manufactured by Tensilkut Engineering. Optional mist coolant and vacuum systems are available for the Tensilkut I.


Product Details



The test strip is clamped in the template, which is manually moved across the Tensilkut table during the machining of the test specimen. The template’s upper guide bar rides along a guide sleeve, which is manually adjusted using the Tensilkut micrometer control. The specific depth of the individual machining cuts is dependent upon the machineability and gauge of the material being cut. Relatively deep cuts are used for roughing the sample to shape, whereas extremely light (.0005” to .001” deep) cuts comprise the finishing passes. When the sample is machined to its finished gauge width, the micrometer dial reaches a stop to automatically prevent further machining of the sample. The top template guide bar is undersized in relation to the finished test specimen, thereby preventing the template from making contact with the Tensilbit. The motor speed control, Tensilmist and Tensilvac can be installed on the Tensilkut I, if ordered with the machine. 





The specific depth of individual machining cuts is dependent on the machineability and gauge of the metal or plastic being machined. A relatively deep cut can be used for roughing the sample to shape, whereas extremely light .0005" (.0125mm) cuts can be used for the finishing passes. The light cutting forces applied to the sample, due to the high RPM, allows the template to be easily moved with very little hand pressure. A sample of 1/4" (6.25mm) thick steel plate requires less than 16 ounces (450 grams) of force to achieve proper machining. When the sample has been cut to its finished gauge width, the micrometer dial reaches a stop to automatically prevent further machining of the sample. The top template guide bar is undersized in relation to the finished test specimen, thereby preventing the template from making contact with the Tensilbit.



Tensilkut I models motors and configurations



Model

Voltage

Motor

Description

Dimensions

Weight

10-13

115V/1Ph

1HP/8 amps

Table Model

12”x14”X12”

60 lbs.

10-14*

230V/1Ph

1HP/8 amps

Table Model

12”x14”x12”

110 lbs

10-23

115V/1Ph

1-1/2HP/8a

Table Model

14”x18”X14”

70 lbs.

10-24*

230V/1Ph

1-1/2HP/8a

Table Model

14”x18”x14”

110 lbs

10-28

115V/1Ph

1-1/2HP/8a

Cabinet Model

20”x28”x48”

120 lbs

10-29*

230V/1Ph

1-1/2HP/8a

Cabinet Model

20”x28”x48”

150 lbs

10-33

115V/1Ph

1-1/2HP/8a

Table Model

14”x18”X14”

75 lbs.

10-34*

230V/1Ph

1-1/2HP/8a

Table Model

14”x18”x14”

115 lbs

10-38

115V/1Ph

1-1/2HP/8a

Cabinet Model

20”x28”x48”

125 lbs

10-39*

230V/1Ph

1-1/2HP/8a

Cabinet Model

20”x28”x48”

155 lbs

10-48

115V/1Ph

2-1/2HP/12a

Floor Model

16”X24”x37”

100 lbs

10-49*

230V/1Ph

2-1/2HP/12a

Floor Model

16”x24”x37”

140 lbs

10-58

115V/1Ph

2-1/2HP/12a

Floor Model

16”X24”x37”

100 lbs

10-59*

230V/1Ph

2-1/2HP/12a

Floor Model

16”x24”x37”

140 lbs

10-68

115V/1Ph

1-1/2HP/8a

Cabinet Model

20”x28”x48”

125 lbs

10-69*

230V/1Ph

1-1/2HP/8a

Cabinet Model

20”x28”x48”

155 lbs

10-78

115V/1Ph

2-1/2HP/12a

Floor Model

16”X24”x37”

100 lbs

10-79*

230V/1Ph

2-1/2HP/12a

Floor Model

16”x24”x37”

140 lbs


Standard Master Templates are available for a wide variety of specimens in accordance with ASTM standards, including for tensile test bars, flexural samples, and compression specimens. Should these not be exactly what you’re looking for, we can custom fabricate a Master Template for you.




The maximum capacity of the Tensilkut I machines



Model

Plastic

Aluminum

Brass

Steel

Stainless

High Alloys

10-10 Series

.001"-.250"

.001"-.125"

.001"-.125"

.001"-.062"

--

--

10-20 Series

.001"-.250"

.001"-.250:

.001"-.250"

.001"-.125"

.001"-.075"

--

10-30 Series

.001"-.500"

.001"-.500"

.001"-.500"

.001"-.125"

.001"-.075"

--

10-40 Series

.001"-.250"

.001"-.250"

.001"-.250"

.001"-.250"

.001"-.125"

.001"-.062"

10-50 Series

.001"-.500"

.001"-.500"

.001"-.500"

.001"-.250"

.001"-.125"

.001"-.062"

10-60 Series

.001"-.750"

.001"-.750"

.001"-.750"

.001"-.125"

.001"-.075"

--

10-70 Series

.001"-.750"

.001"-.750"

.001"-.750"

.001"-.250"

.001"-.125"

.001"-.062"


Tensilbits are a crucial part of the operation of your Tensilkut I. Their exacting size and design hold the tight tolerances your test specimens need; Tensilbits are available in a variety of configurations for preparing physical test specimens from a range of materials from hard metals to the softest plastic

Thiết bị máy cắt mẫu chuẩn máy kéo căng vật liệu  Milling Machine for Preparation of Flat Tensile Specimens TENSILKUT I , TENSILKUT II

Tensilkut I



Tensilkut is a precision milling machine designed specifically for machining flat tensile samples from metals and non-metallic materials. Tensilkut machined specimens are free of induced heat or cold working distortion, and are accurate to within +.0005”. A sample can be machined in a few minutes by lab technicians with no previous machining experience.


Product Summary



The Tensilkut I was designed for the specific purpose of preparing flat metal or non-metallic dogbone shaped test specimens. The compact size of the equipment permits it to be conveniently located in the laboratory. Small table top units or larger floor mounted models are available to accomodate any space and/or work volume requirements. Material thicknesses of up to 3/4”, depending upon the hardness and machineability of the material, can be cut on some Tensilkut I models. The specimens are accurate to within +.0005" when prepared on the Tensilkut machine with a Tensilbit and a standard or special master template manufactured by Tensilkut Engineering. Optional mist coolant and vacuum systems are available for the Tensilkut I.


Product Details



The test strip is clamped in the template, which is manually moved across the Tensilkut table during the machining of the test specimen. The template’s upper guide bar rides along a guide sleeve, which is manually adjusted using the Tensilkut micrometer control. The specific depth of the individual machining cuts is dependent upon the machineability and gauge of the material being cut. Relatively deep cuts are used for roughing the sample to shape, whereas extremely light (.0005” to .001” deep) cuts comprise the finishing passes. When the sample is machined to its finished gauge width, the micrometer dial reaches a stop to automatically prevent further machining of the sample. The top template guide bar is undersized in relation to the finished test specimen, thereby preventing the template from making contact with the Tensilbit. The motor speed control, Tensilmist and Tensilvac can be installed on the Tensilkut I, if ordered with the machine. 





The specific depth of individual machining cuts is dependent on the machineability and gauge of the metal or plastic being machined. A relatively deep cut can be used for roughing the sample to shape, whereas extremely light .0005" (.0125mm) cuts can be used for the finishing passes. The light cutting forces applied to the sample, due to the high RPM, allows the template to be easily moved with very little hand pressure. A sample of 1/4" (6.25mm) thick steel plate requires less than 16 ounces (450 grams) of force to achieve proper machining. When the sample has been cut to its finished gauge width, the micrometer dial reaches a stop to automatically prevent further machining of the sample. The top template guide bar is undersized in relation to the finished test specimen, thereby preventing the template from making contact with the Tensilbit.



Tensilkut I models motors and configurations



Model

Voltage

Motor

Description

Dimensions

Weight

10-13

115V/1Ph

1HP/8 amps

Table Model

12”x14”X12”

60 lbs.

10-14*

230V/1Ph

1HP/8 amps

Table Model

12”x14”x12”

110 lbs

10-23

115V/1Ph

1-1/2HP/8a

Table Model

14”x18”X14”

70 lbs.

10-24*

230V/1Ph

1-1/2HP/8a

Table Model

14”x18”x14”

110 lbs

10-28

115V/1Ph

1-1/2HP/8a

Cabinet Model

20”x28”x48”

120 lbs

10-29*

230V/1Ph

1-1/2HP/8a

Cabinet Model

20”x28”x48”

150 lbs

10-33

115V/1Ph

1-1/2HP/8a

Table Model

14”x18”X14”

75 lbs.

10-34*

230V/1Ph

1-1/2HP/8a

Table Model

14”x18”x14”

115 lbs

10-38

115V/1Ph

1-1/2HP/8a

Cabinet Model

20”x28”x48”

125 lbs

10-39*

230V/1Ph

1-1/2HP/8a

Cabinet Model

20”x28”x48”

155 lbs

10-48

115V/1Ph

2-1/2HP/12a

Floor Model

16”X24”x37”

100 lbs

10-49*

230V/1Ph

2-1/2HP/12a

Floor Model

16”x24”x37”

140 lbs

10-58

115V/1Ph

2-1/2HP/12a

Floor Model

16”X24”x37”

100 lbs

10-59*

230V/1Ph

2-1/2HP/12a

Floor Model

16”x24”x37”

140 lbs

10-68

115V/1Ph

1-1/2HP/8a

Cabinet Model

20”x28”x48”

125 lbs

10-69*

230V/1Ph

1-1/2HP/8a

Cabinet Model

20”x28”x48”

155 lbs

10-78

115V/1Ph

2-1/2HP/12a

Floor Model

16”X24”x37”

100 lbs

10-79*

230V/1Ph

2-1/2HP/12a

Floor Model

16”x24”x37”

140 lbs


Standard Master Templates are available for a wide variety of specimens in accordance with ASTM standards, including for tensile test bars, flexural samples, and compression specimens. Should these not be exactly what you’re looking for, we can custom fabricate a Master Template for you.




The maximum capacity of the Tensilkut I machines



Model

Plastic

Aluminum

Brass

Steel

Stainless

High Alloys

10-10 Series

.001"-.250"

.001"-.125"

.001"-.125"

.001"-.062"

--

--

10-20 Series

.001"-.250"

.001"-.250:

.001"-.250"

.001"-.125"

.001"-.075"

--

10-30 Series

.001"-.500"

.001"-.500"

.001"-.500"

.001"-.125"

.001"-.075"

--

10-40 Series

.001"-.250"

.001"-.250"

.001"-.250"

.001"-.250"

.001"-.125"

.001"-.062"

10-50 Series

.001"-.500"

.001"-.500"

.001"-.500"

.001"-.250"

.001"-.125"

.001"-.062"

10-60 Series

.001"-.750"

.001"-.750"

.001"-.750"

.001"-.125"

.001"-.075"

--

10-70 Series

.001"-.750"

.001"-.750"

.001"-.750"

.001"-.250"

.001"-.125"

.001"-.062"


Tensilbits are a crucial part of the operation of your Tensilkut I. Their exacting size and design hold the tight tolerances your test specimens need; Tensilbits are available in a variety of configurations for preparing physical test specimens from a range of materials from hard metals to the softest plastic

 

Các sản phẩm khác