0976.299.749
Thiết bị kiểm tra độ va đập màng sơn chuẩn ASTM D2794 / ISO-1 / ISO-2 hãng Neurtek Việt Nam
Impact tester for paint
Impact test of paint coatings applied to metal base. ISO, DIN, ASTM.
The Impact Tester is used for measuring the resistance of coatings to impact. Thanks to it you can simulate the production of cracks and peeling, resistance to shocks, the flexibility, adherence and elongation of coatings.
If you have a standard to comply with, just place the mass at the indicated height and release it. Then, check visually for possible cracks.
To check the resistance of a coating, you can continue testing by gradually increasing the height until the mass produces cracks on the sample.
The Impact Tester comes with a support base, ruled tube and an impact mass equipped with a holding device according to the required standard - (for specific accessories, see table below).
|
Reference |
Model |
Standard |
Impact |
Extra |
Static Weight with ball |
Ø Ball |
Ø Ring |
Max. |
|
0304020 |
Impact Tester |
UNE EN ISO 6272-1 |
1000 gr. |
1000 gr. |
--- |
20 mm |
27 mm |
1.000 mm |
|
0304030 |
Impact Tester QUALICOAT |
UNE EN ISO 6272-2 |
1000 gr. |
1000 gr. |
150 gr. |
15,9 mm |
16,3 mm |
1.000 mm |
|
0304040 |
Impact Tester ASTM |
ASTM D 2794 |
900 gr. |
120 gr. |
--- |
15,9 mm |
|
1.000 mm |
|
0305300 |
Impact Tester for Enamel |
UNE EN 10209 |
1500 gr. |
--- |
360 gr. |
22 mm |
20,6 mm |
1.000 mm |
|
0304100 |
Impact Tester for Reflective Coatings |
UNE EN 12966-1 |
510 gr. |
--- |
--- |
50 mm |
--- |
1.300 mm |
|
0304110 |
Impact Tester Vertical Signalling |
UNE 135331 |
450 gr. |
--- |
--- |
50 mm |
--- |
220 mm |
|
|
|
|
|
|
|
|
|
|
|
0305200 |
Portable Impact Tester for Enamel and Laminates |
UNE EN 438-2 |
Spring 0 a 90N |
--- |
--- |
5 mm |
--- |
--- |
For more information check product datasheet.
Tổng truy cập: 